[Simh] VMS 4.x crashing on every other boot
Vorländer, Martin
MV at PDV-SYSTEME.DE
Sat Mar 15 01:05:20 EDT 2008
>>> boot -flag (n),30000
where (n) is your system root's number.
See http://64.223.189.234/vmsfaq/vmsfaq_022.html#alpha11
HTH
Martin
Martin Vorländer
Softwareentwicklung & VMS-Support
PDV-Systeme GmbH
Bornhardtstraße 3
38644 Goslar
Tel +49 (0) 5321 3703–33
Fax +49 (0) 5321 8924
E-Mail mv at pdv-systeme.de
www.pdv-systeme.de
Geschäftsführer Dr. Dietmar Kipping, Amtsgericht Braunschweig HRB 110209
Unsere allgemeinen Geschäftsbedingungen finden Sie unter: www.pdv-systeme.de/unternehmen/agb.htm
Hinweis:
Diese E-Mail ist vertraulich. Wenn Sie nicht der vorgesehene Empfänger sind, verwenden Sie bitte keine Inhalte dieser E-Mail und leiten sie auch nicht weiter. Wenn Sie fälschlicherweise diese E-Mail bekommen haben, informieren Sie uns bitte umgehend und löschen dieses Dokument.
Advice:
This e-mail is confidential. If you are not the intended recipient, please do not disclose or use the contents of the mail. If you have erroneously received this e-mail, please inform us immediately by return e-mail and delete the document.
----- Original Message -----
From: simh-bounces at trailing-edge.com <simh-bounces at trailing-edge.com>
To: w781 at planet.nl <w781 at planet.nl>; Andrew Warkentin <andreww at datanet.ab.ca>
Cc: simh at trailing-edge.com <simh at trailing-edge.com>
Sent: Fri Mar 14 21:56:11 2008
Subject: Re: [Simh] VMS 4.x crashing on every other boot
Is there a similar switch to B/R5:30000 for Alpha to generate verbose
VMS startup output?
Dave
> -----Original Message-----
> From: simh-bounces at trailing-edge.com
> [mailto:simh-bounces at trailing-edge.com] On Behalf Of Wilm Boerhout
> Sent: Friday, March 14, 2008 4:19 PM
> To: Andrew Warkentin
> Cc: simh at trailing-edge.com
> Subject: Re: [Simh] VMS 4.x crashing on every other boot
>
> on 11-3-2008 11:27 Andrew Warkentin wrote...
> > I have tried to run VMS 4.4 and VMS 4.6 under the
> VAX/11-780 simulator.
> > It boots properly every time without the mandatory update
> installed,
> > but it hangs after the system version have been printed on
> the console
> > the first time it is booted after the mandatory update has
> been installed.
> >
> > If it is rebooted, it boots properly, but it continues to alternate
> > between hanging and booting properly on successive boots. I am not
> > sure if this is a SIMH bug, or if I have misconfigured VMS
> (but I just
> > went with the default install and did not change any
> configuration).
> > It is kind of weird that it starts hanging only after the mandatory
> > update has been installed.
> >
> >>> B/R5:30000 should give you a clue as to what startup
> phase is causing the problem. It's verbose!
>
> --
> Wilm Boerhout |
> Zwolle, | - 'My memory's fine!'
> The Netherlands | - 'But you keep forgetting your mistakes!'
> | - 'Exactly!'
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
_______________________________________________
Simh mailing list
Simh at trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20080315/6559a713/attachment-0003.html>
More information about the Simh
mailing list