[Simh] VMS 4.x crashing on every other boot
Hittner, David T.
david.hittner at ngc.com
Fri Mar 14 16:56:11 EDT 2008
Is there a similar switch to B/R5:30000 for Alpha to generate verbose
VMS startup output?
Dave
> -----Original Message-----
> From: simh-bounces at trailing-edge.com
> [mailto:simh-bounces at trailing-edge.com] On Behalf Of Wilm Boerhout
> Sent: Friday, March 14, 2008 4:19 PM
> To: Andrew Warkentin
> Cc: simh at trailing-edge.com
> Subject: Re: [Simh] VMS 4.x crashing on every other boot
>
> on 11-3-2008 11:27 Andrew Warkentin wrote...
> > I have tried to run VMS 4.4 and VMS 4.6 under the
> VAX/11-780 simulator.
> > It boots properly every time without the mandatory update
> installed,
> > but it hangs after the system version have been printed on
> the console
> > the first time it is booted after the mandatory update has
> been installed.
> >
> > If it is rebooted, it boots properly, but it continues to alternate
> > between hanging and booting properly on successive boots. I am not
> > sure if this is a SIMH bug, or if I have misconfigured VMS
> (but I just
> > went with the default install and did not change any
> configuration).
> > It is kind of weird that it starts hanging only after the mandatory
> > update has been installed.
> >
> >>> B/R5:30000 should give you a clue as to what startup
> phase is causing the problem. It's verbose!
>
> --
> Wilm Boerhout |
> Zwolle, | - 'My memory's fine!'
> The Netherlands | - 'But you keep forgetting your mistakes!'
> | - 'Exactly!'
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
More information about the Simh
mailing list