[Simh] telnet console timeout?

[Brett Bump]

On Fri, 5 Oct 2007, Mark Suhovecky wrote:

>
> A week or two back I posted asking about how to get
> a decent vt100 console for openVMS under SimH. A number
> of you shared the
>
> set console telnet=xxxx
>
> option with me. Thanks again- this works great.
>
> I've noticed that the simulation will wait a minute or so
> for a telnet login, then timeout. Is there another config
> option that will allow me a longer timeout, or better,
> no timeout at all?
>
> Thanks,
>
> Mark
>
> --
>
> Mark Suhovecky
> Technical Support Consultant
> Institute for Structure & Nuclear Astrophysics
> Nieuwland Science Hall Room 117
> (574) 631-2611
> suhovecky at nd.edu
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>

Mark this sounds more like a DNS issue than one with simh.  Check
your network connection settings and if you can, try using telnet
to connect to some other site (see if you get the same delays).

Brett