[Simh] Telnet with PDP-11 Emulator

[Eric Schmucker]

I'm running XP Pro SP2 also. I just started using SIMH a couple of weeks
ago, so I don't know much.

 

What OS are you running? I could never get the telnet to DZ feature to work
with the pre-build 'full' RSTS/E environment I downloaded from the web. It
started working after I re-installed RSTS/E from scratch. I just defaulted
most of the install questions, so I don't know what specific step did it.
Maybe just having the DZ device enabled and configured during the install
adds support for it. I used PDP-11 - RSTS/E from 1976-1980 and don't
remember the gory details about configuring the hardware and OS.

 

Or, if you are using another OS, then maybe it doesn't know about the DZ
device and isn't listening to it.

 

-Eric

 

  _____  

From: King, Paul ( Energy Wholesale ) [mailto:Paul.King at eon-uk.com] 
Sent: Wednesday, September 20, 2006 3:11 AM
To: Eric Schmucker
Subject: RE: [Simh] Telnet with PDP-11 Emulator

 

Hi

 

Thanks for that 

 

Unfortunately when I configure as you suggest, the simulator starts
correctly however when in a Windows command window typing 'Telnet localhost'
gives the prompt 'Connected to the PDP-11 Simulator' and a flashing cursor.
No further keystrokes are recognised, this is under Windows XP professional
service pack 2

 

Any more ideas would be most welcome

 

Thanks for your time and help

 

Paul

 

  _____  

From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-edge.com]
On Behalf Of Eric Schmucker
Sent: Tuesday, September 19, 2006 9:26 PM
To: SimH at trailing-edge.com
Subject: Re: [Simh] Telnet with PDP-11 Emulator

 

Hello,

 

These commands work for me with PDP-11 simulator V3.6-1:

 

set DZ enabled

set DZ lines=8 

set DZ 7b 

attach -am DZ 23

 

You have to type HELLO to get an account number prompt.

 

-Eric

  _____  

From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-edge.com]
On Behalf Of King, Paul ( Energy Wholesale )
Sent: Tuesday, September 19, 2006 7:57 AM
To: SimH at trailing-edge.com
Subject: [Simh] Telnet with PDP-11 Emulator

 

Hi

It has been reported by a colleague of mine that when using SIMH version 2.9
and running under Windows XP Professional, that Telnet sessions worked
correctly. However moving to the more recent versions, starting a Telnet
session shows the connection to a PDP-11 but then stops i.e. does not
continue to a log in prompt.

Are there any changes that may have affected this or issues we should be
aware of or are we doing something stupid

;  Configure 8 off serial ports

SET DZ LINES=8

att dz 15000

from Windows command window

Telnet localhost 15000

The connection is made but there is no command prompt, any ideas

Regards

 

Paul King

___________________________ Disclaimer Notice ____________________
This message and any attachments are confidential and should only
be read by those to whom they are addressed. If you are not the
intended recipient, please contact us, delete the message from your
computer and destroy any copies. Any distribution or copying without
our prior permission is prohibited.
 
Internet communications are not always secure and therefore the
E.ON Group does not accept legal responsibility for this message.
The recipient is responsible for verifying its authenticity before
acting on the contents. Any views or opinions presented are solely
those of the author and do not necessarily
represent those of the E.ON Group.
 
E.ON UK plc, Westwood Way, Westwood Business Park,
Coventry, CV4 8LG.
Registered in England & Wales No. 2366970
 
E.ON UK Trading Ltd, Westwood Way, Westwood Business Park,
Coventry, CV4 8LG
Registered in England & Wales No. 4178314
 
E.ON UK Trading Ltd is authorised and regulated by the Financial Services
Authority to carry out energy investment activities.
 
Telephone +44 (0) 2476 42 4000
Fax +44 (0) 2476 42 5432
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20060920/0cdb1283/attachment-0003.html>