[Simh] [BUG] simh v3.2-3 won't boot NetBSD/VAX

[Peter "Firefly" Lund]

On Sat, 13 Nov 2004, Zachary wrote:

> You want to boot from DUA1, not dual, I think.

Yep, so I found out.

Now it hangs during the boot:

>>>boot dua1:
(BOOT/R5:0 DUA1



  2..
-DUA1
  1..0..


>> NetBSD/vax boot [1.11 Wed Feb 11 09:14:20 UTC 2004] <<
>> Press any key to abort autoboot 0
getdisklabel: no disk label
nfs_open: must mount first.
2371692+117752=0x25fe00
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.2 (INSTALL) #0: Wed Feb 11 09:24:13 UTC 2004

autobuild at tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/vax/OBJ/autobuild/n
tbsd-1-6-PATCH002/src/sys/arch/vax/compile/INSTALL

MicroVAX 3800/3900
cpu: KA655, CVAX microcode rev 6 Firmware rev 83
total memory = 16328 KB
avail memory = 11384 KB
using 229 buffers containing 916 KB of memory
mainbus0 (root)
ibus0 at mainbus0
uba0 at ibus0: Q22
dz1 at uba0 csr 160100 vec 304 ipl 15
mtc0 at uba0 csr 174500 vec 774 ipl 15
mscpbus0 at mtc0: version 5 model 3
mscpbus0: DMA burst size set to 4
mt0 at mscpbus0 drive 0: TK50
mt1 at mscpbus0 drive 1: TK50
mt2 at mscpbus0 drive 2: TK50
mt3 at mscpbus0 drive 3: TK50
uda0 at uba0 csr 172150 vec 770 ipl 15
mscpbus1 at uda0: version 3 model 3
mscpbus1: DMA burst size set to 4
ra0 at mscpbus1 drive 0: RA92
ra1 at mscpbus1 drive 1: RRD40
ra2 at mscpbus1 drive 2: RD54
rx0 at mscpbus1 drive 3: RX50
qe0 at uba0 csr 174440 vec 764 ipl 15
qe0: delqa, hardware address 08:00:2b:aa:bb:cc
md0: internal 1536 KB image area
boot device: ra1
root on md0a dumps on md0b
Clock has gained 275 days - CHECK AND RESET THE DATE.
root file system type: ffs


I'll try NetBSD 1.5.2 next.

-Peter